Dell OptiPlex 160 (Late 2008) Manuel d'utilisateur télécharger pdf (Page 48)



6. Press any key to confirm that you want to start from the CD/DVD.



7. Type 1 to Run the 32 Bit Dell Diagnostics.



8. At the Dell Diagnostics Main Menu, type 1 to select Dell 32-bit Diagnostics for Resource CD (graphical user interface).



9. Press <Tab> to select Test System and then press <Enter>.



10. At the Dell Diagnostics Main Menu, left-click with the mouse, or press <Tab> and then <Enter>, to select the test you want to run (see Dell Diagnostics

Main Menu).



11. After all tests have completed, close the test window to return to the Dell Diagnostics Main Menu.



12. Close the main menu window to exit the Dell Diagnostics and restart the computer.



13. Remove the Drivers and Utilities media from the optical drive.



Dell Diagnostics Main Menu

After the Dell Diagnostics loads the following menu appears:

Press <Tab> to select the test you want to run and then press <Enter>.

After Test System is selected, the following menu appears:

For any problem encountered during a test, a message appears with an error code and a description of the problem. Write down the error code and problem

description exactly as it appears and follow the instructions on the screen. If you cannot resolve the problem, contact Dell (see Contacting Dell).

The following tabs provide additional information for tests run from the Custom Test or Symptom Tree option:

NOTE: Using the one-time boot menu changes the boot sequence for the current boot only. Upon restart, the computer boots according to the

boot sequence specified in the BIOS Setup Utility.

NOTE: It is recommended that you select Test System to run a complete test on your computer. Selecting Test Memory initiates the extended

memory test, which can take up to thirty minutes or more to complete. When the test completes, record the test results and then press any key to

return to the previous menu.

NOTE: Write down any error codes and problem descriptions exactly as they appear and follow the instructions on the screen.



Option



Function

Test Memory

Run the stand-alone memory test

Test System

Run system diagnostics

Exit

Exit the diagnostics

NOTE: It is recommended that you select Test System to run a complete test on your computer. Selecting Test Memory initiates the extended memory

test, which can take up to thirty minutes or more to complete. When the test completes, record the test results and then press any key to return to this

menu.



Option



Function

Express Test

Performs a quick test of devices in the system. This typically can take 10 to 20 minutes.



NOTE: The Express Test requires no interaction on your part. Run Express Test first to increase the possibility of tracing a problem quickly.

Extended Test

Performs a thorough check of devices in the system. This typically can take an hour or more.



NOTE: The Extended Test periodically requires your input to answer specific questions.

Custom Test

Use to test a specific device or customize the tests to be run.

Symptom Tree

This option allows you to select tests based on a symptom of the problem you are having. This option lists the most common symptoms.

NOTE: It is recommended that you select Extended Test to perform a more thorough check of devices in the computer.

NOTE: When contacting Dell support, have your Service Tag ready. The Service Tag for your computer is located at the top of each test screen.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 62 63

Commentaires sur ces manuels

Pas de commentaire

Dell OptiPlex 160 (Late 2008) Manuel d'utilisateur Page 48

Commentaires sur ces manuels

Produits connexes et manuels pour Ordinateurs Dell OptiPlex 160 (Late 2008)