Dell Precision 340 Manuel d'utilisateur télécharger pdf (Page 11)

Back to Contents Page

Drives

DellPrecision™WorkStation340ServiceManual



Removing and Installing a Floppy Drive—Small Desktop Computer

1. Unpack the drive and prepare it for installation.

Check the documentation that accompanied the drive to verify that the drive is configured for your computer. Change any settings necessary for your

configuration.

2. Open the computer cover.

3. If you are replacing a drive that is already installed in the bay, disconnect the power and floppy-drive cables from the back of the drive before you

remove the drive and bracket assembly.

Floppy-Drive Cable Removal



4. Press inward on the two tabs on the sides of the drive bay to disengage the bracket.

5. Slide the bracket upward, and remove it from the inside of the computer.

Floppy-Drive Removal



NOTE: Cable ends are color coded so that black identifies the floppy-disk drive cable, yellow the front I/O panel cable, orange the secondary IDE cable,

white the SCSI cable, and blue the primary IDE cable.

CAUTION: Toavoidthepossibilityofelectricshock,turnoffthecomputerandanydevices,disconnectthemfromtheirelectricaloutlets,andthen

wait at least 5 seconds before you open the computer cover. Also, before you install a drive, see the other precautions in "Safety First—For You

and Your Computer."

NOTICE: To avoid possibly damaging the drive by electrostatic discharge, ground yourself by touching an unpainted metal surface on the back of the

computer.

power cable

floppy-drive cable

floppy-drive connector

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Dell Precision 340 Manuel d'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Ordinateurs Dell Precision 340