Dell DR4000 Manuel d'utilisateur télécharger pdf (Page 140)

Result

Replication Schedule:

Start Stop

Sunday 22:00 05:00

Monday 22:00 05:00

Tuesday 22:00 05:00

Wednesday 22:00 05:00

Thursday 22:00 05:00

Friday 22:00 05:00

Saturday 22:00 05:00

schedule --add --day <day of the week> [--cleaner] [--replication] [--start_time <hh:mm>]

[-- stop_time <hh:mm>] [--name <name>]

Description

Creates a new Cleaner or Replication schedule for a DR Series system (or for a specific container that you define using

the --name <name> command option) using start time and stop time setpoints.

NOTE: Without any Cleaner schedule set, the DR Series system Cleaner process automatically starts within two

minutes after it detects that no data ingest operation or other system operation activity is present. So, if your DR

Series system runs intermittent or inconsistent ingest, readback, or replication operations, there is no need to set

a Cleaner schedule (it will automatically run during periods of low or non-activity). However, if your system runs

regular and consistent ingest, readback, or replication operations, you should create a Cleaner schedule that runs

only during a known period of low or non-activity (for example, on a day or time period sufficient to complete this

process). If your system does not meet either of these cases, you can still manually run the Cleaner. For more

information, see

maintenance --filesystem [--reclaim_space].

Syntax

schedule --add --day Sunday --start_time 06:00 --stop_time 22:00 --cleaner

NOTE: Set a corresponding stop time for every start time in each Cleaner (or Replication) schedule you create. The

following example shows setting up a Cleaner schedule for the remainder of the week (Monday through

Saturday).

NOTE: Do not select 00:00 for a start time or stop time endpoint for midnight when setting Cleaner or Replication

schedules (instead, use either the 23:55 or 00:05 value).

Result

schedule --add --day Monday --start_time 02:00 --stop_time 22:00 --cleaner

schedule --add --day Tuesday --start_time 02:00 --stop_time 22:00 --cleaner

schedule --add --day Wednesday --start_time 02:00 --stop_time 22:00 --cleaner

schedule --add --day Thursday --start_time 02:00 --stop_time 22:00 --cleaner

schedule --add --day Friday --start_time 02:00 --stop_time 22:00 --cleaner

schedule --add --day Saturday --start_time 06:00 --stop_time 22:00 --cleaner

NOTE: To create a Replication schedule (use the DR Series system CLI --replication command), and the same

process shown here to schedule the start and stop times for a Replication schedule. This lets you schedule

starting and stopping times for each day in the week in which you want the Replication process to run.

schedule --delete --day <day of the week> [--cleaner] [--name <name>] [--replication]

Description

Deletes a day in an existing Cleaner or Replication schedule for a DR Series system (or for a specific container that you

define by name using the DR Series system CLI --name <name> command).

140

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 149 150

Commentaires sur ces manuels

Pas de commentaire

Dell DR4000 Manuel d'utilisateur Page 140

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Dell DR4000