Dell DR4000 Manuel d'utilisateur télécharger pdf (Page 15)

DR Series System Drive and System Capacities

The DR Series system comes in the following types:

• DR4000 system—which consists of preinstalled DR4000 system software on a modified Dell R510 appliance platform.

• DR4100 system—which consists of preinstalled DR4100 system software on a modified Dell R720xd appliance

platform.

• DR6000 system—which consists of preinstalled DR6000 system software on a modified Dell R720xd appliance

platform.

• DR2000v system— which is a Virtual Appliance that can run on a VMware ESXi or Microsoft Hyper-v server. Many

CLI commands are not applicable to the DR2000v and are noted in this guide.

The internal system drive capacity and available physical capacities of the DR Series system vary, depending on your

system type (DR4000, DR4100, etc.) and drives installed. For details, see:

•

Dell DR Series System Administrator Guide

— “Drive and Available Physical Capacities” and “DR Series Expansion

Shelf”

•

Dell DR Series System Interoperability Guide

— “Expansion Unit Limits”

Accessing the DR Series System CLI Commands

To access the DR Series system CLI commands from the system CLI prompt, complete the following:

1. Launch a terminal emulation application and start the process for logging in to the DR Series system.

2. In Host Name (or IP address), type the host name or IP address for the DR Series system, and click Open.

3. At the system prompt, enter the username for the Administrator:

• Type administrator

• Press <Enter>

4. At the administrator password prompt, enter the password for the Administrator (the default is St0r@ge!):

• Type St0r@ge!

• Press <Enter>

The DR Series system administrator prompt is displayed.

5. At the administrator prompt, type help.

The DR Series system CLI commands are displayed. For more information, see the section DR Series System CLI

Commands Overview.

DR Series System CLI Commands Overview

The following command groups are available. For more information on each command group, run <command name>

--help show

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 149 150

Pas de commentaire

Dell DR4000 Manuel d'utilisateur Page 15