Dell POWEREDGE R710 Manuel d'utilisateur Page 96

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 208
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 95
96 Installing System Components
3
If installed, remove all expansion cards from expansion-card riser 1. See
"Removing an Expansion Card."
4
Remove the VFlash media card (if installed) from the iDRAC6 Enterprise
card. See "VFlash Media (Optional)."
5
If present, disconnect the Ethernet cable from the iDRAC6 Enterprise
card.
6
Remove the iDRAC6 Enterprise card:
a
Pull back slightly on the two tabs at the front edge of the card and
gently lift the front edge of the card off of the retention standoffs.
b
As the card releases from the standoffs, the connector under the card
disengages from the system board connector.
c
Slide the card away from the back of the system until the RJ-45
connector is clear of the back panel, then lift the card out of the
system.
7
Install the plastic filler plug for the vacated RJ-45 Ethernet port in the
system back panel.
8
Reinstall the expansion card(s) in expansion-card riser 1. See "Installing an
Expansion Card."
9
Close the system. See "Closing the System."
10
Reconnect the system and peripherals to their power sources, and turn
them on.
VFlash Media (Optional)
The optional VFlash media is a Secure Digital (SD) card that can be used
with the optional iDRAC6 Enterprise card. See "Integrated Dell Remote
Access Controller 6 (iDRAC6) Enterprise Card (Optional)."
1
Locate the VFlash media slot on the back of the system
and insert the
contact-pin end of the SD card (with the label side facing up) into the
slot. See
"Back Panel Features and Indicators" for the slot location.
NOTE: The slot is keyed to ensure correct insertion of the card.
2 Press inward on the card to lock it into the slot
.
To remove the card, push inward on the card to release it, and pull the card
from the card slot.
Vue de la page 95
1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 207 208

Commentaires sur ces manuels

Pas de commentaire