Dell 15 Manuel de service télécharger pdf (Page 30)

Replacing the Fan

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before Working Inside Your Computer. After working inside your

computer, follow the instructions in After Working Inside Your

Computer. For more safety best practices, see the Regulatory

Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Align the screw holes on the fan with the screw holes on the base frame.

2 Replace the screws that secure the fan to the base frame.

3 Route the fan cable through the routing guides on the base frame.

4 Connect the fan cable to the system board.

5 Route the display cable through the routing guides on the base frame.

6 Connect the display cable to the system board.

7 Adhere the I/O-board cable to the fan.

8 Slide the I/O-board cable into the I/O-board cable connector and press

down the latch to secure the cable.

Post-requisites

1 Replace the battery.

2 Replace the base cover.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 76 77

Pas de commentaire

Dell 15 Manuel de service Page 30