Dell 3330dn - Laser Printer B/W Guide de l'utilisateur télécharger pdf (Page 152)

Solid black or white streaks appear on transparencies or paper

These are possible solutions. Try one or more of the following:

MAKE SURE THE FILL PATTERN IS CORRECT

If the fill pattern is incorrect, choose a different fill pattern from your software program.

CHECK THE PAPER TYPE

• Try a different type of paper.

• For transparencies, use only ones recommended by the printer manufacturer.

• Make sure the Paper Type setting matches what is loaded in the tray or feeder.

• Make sure the Paper Texture setting is correct for the type of paper or specialty media loaded in the tray or

feeder.

MAKE SURE THE TONER IS DISTRIBUTED EVENLY IN THE TONER CARTRIDGE

Remove the toner cartridge and shake it from side to side to redistribute the toner to extend the life of the cartridge,

and then reinstall it.

THE TONER CARTRIDGE MAY BE DEFECTIVE OR LOW ON TONER

Replace the used toner cartridge with a new one.

Embedded Web Server does not open

These are possible solutions. Try one or more of the following:

CHECK THE NETWORK CONNECTIONS

Make sure the printer and computer are turned on and connected to the same network.

CHECK THE NETWORK SETTINGS

Depending on the network settings, you may need to type https:// instead of http:// before the printer IP

address to access the Embedded Web Server. For more information, see your system administrator.

Troubleshooting

152

Downloaded from ManualsPrinter.com Manuals

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 158 159 160

Pas de commentaire

Dell 3330dn - Laser Printer B/W Guide de l'utilisateur Page 152