Dell PowerEdge Rack Enclosure 4210 Manuel d'utilisateur télécharger pdf (Page 3)

Installing the Side Stabilizer Feet

Remove the lower side panels (see "Removing the Lower Side Panels"

in your rack installation guide).

On the side of the rack frame’s bottom rail, locate the four holes

(see Figure 1-2).

Position each stabilizer foot against the base of the rack frame and align

its holes with the corresponding holes in the frame.

Use the provided bolts, washers, and cage nuts to secure each foot to the rack

as shown in Figure 1-2.

Figure 1-2. Installing the Side Stabilizer Feet

1 side stabilizer foot (2)

1 2 3 4 5 6 7 8 ... 19 20

Pas de commentaire

Dell PowerEdge Rack Enclosure 4210 Manuel d'utilisateur Page 3