Dell PowerEdge Rack Enclosure 4220 Manuel d'utilisateur télécharger pdf (Page 10)

8 Installation Guide

• Needle-nose pliers

• 4-mm Allen wrench (if you want to reverse the direction that

the front door opens)

• Keys to the rack doors and side panels

• 13-mm wrench (for rack removal from pallet)

• 17-mm wrench (for rack removal from pallet)

Removing and Replacing the Rack Doors

WARNING: Because of the size and weight of the rack cabinet doors,

never attempt to remove or install them by yourself.

WARNING: When storing the doors, lay the doors flat so they do not fall over

and accidentally injure someone.

Removing the Front Door

Pull the door latch and open the front door all the way (see Figure 1-1).

While holding the door, pull the hinge pin upward so that it clears the

door’s hinge-pin housing (see Figure 1-1).

The hinge pin’s retention clip prevents the hinge from being pulled out of

the hinge body.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 185 186

Pas de commentaire

Dell PowerEdge Rack Enclosure 4220 Manuel d'utilisateur Page 10