Dell PowerEdge RAID Controller 5i Manuel d'utilisateur Page 47

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 112
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 46
Driver Installation 45
Upgrading the Kernel
If you run the up2date utility to upgrade the kernel, you must reinstall the DKMS-enabled driver
packages. Perform the following steps to update the kernel:
1
In a terminal window, type the following:
dkms build -m <module_name> -v <module version> -k <kernel version>
dkms install -m <module_name> -v <module version> -k <kernel version>
2
To check whether the driver is successfully installed in the new kernel, type:
dkms status
You must see a message similar to the following one on the screen to confirm installation:
<driver name>, <driver version>, <new kernel version>: installed
Installing the SUSE Linux Enterprise Server (Version 9 or 10) Driver
Use the procedures in this section to install the driver for SUSE Linux Enterprise Server (version 9 or
version 10). The driver is updated frequently. To ensure you have the current version of the driver,
download the updated SUSE Linux Enterprise Server (version 9 or 10) driver from the Dell Support
website at
support.dell.com
.
Installing the Driver Using an Update RPM
The following procedure explains the installation procedure for the SUSE Linux Enterprise Server
(version 9 or 10) operating system and the appropriate RAID driver using an update RPM.
Installing the RPM Package With DKMS Support
Perform the following steps to install the RPM package with DKMS support.
1
Uncompress the zipped file of the DKMS-enabled driver package.
2
Install the DKMS package using the command
rpm -Uvh
<
DKMS package name
>.
3
Install the driver package using the
rpm -Uvh
<
Driver package name
>.
4
Reboot the system to load the new driver.
File and Directories Needed to Create the Driver Update Diskette (DUD)
The following files are needed before you create the DUD.
NOTE: The megaraid_sas driver package installs these files. You do not need to do anything at this point.
1
The directory
/usr/src/megaraid_sas-<driver_version>
contains the driver source code,
dkms.conf
,
and specifications file for the driver.
2
In this directory, the subdirectory
redhat_driver_disk
contains the files needed to create the DUD.
The files needed are
disk_info
,
modinfo
,
modules.dep
, and
pcitable
.
Dell_PERC5_UG.book Page 45 Tuesday, February 13, 2007 6:02 PM
Vue de la page 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 111 112

Commentaires sur ces manuels

Pas de commentaire