Dell PowerVault 50F (Fibre Channel Switch) Manuel d'utilisateur télécharger pdf (Page 10)

Installing the PowerVault™ 50F Switch: Dell™ PowerVault™ 50F 8-Port Fibre Channel Switch Installation and Troubleshooting Guide

file:///C|/Users/sharon_anand/Desktop/PowerVault/50f_enit/INSTALL.HTM[3/15/2013 11:31:55 AM]

6. Tighten the screws holding the adjustable brackets to the outer slides.

Installing the Switch in the Rack

To install the switch in the rack, perform the following steps:

1. At the back of the rack, carefully align the switch's inner slides with the outer slides on the rack.

Slide the inner slides into the outer slides and push the switch all the way into the rack, as shown in

Figure 1-5. The two safety releases on the slides must be pressed for the switch to slide all the way in.

Figure 1-5. Installing the Switch in the Rack

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 100 101

Pas de commentaire

Dell PowerVault 50F (Fibre Channel Switch) Manuel d'utilisateur Page 10