Dell PowerVault DP500 Manuel d'utilisateur télécharger pdf (Page 14)

14 Introduction

NOTE: Do not install the iSNS Server software on Initiator (host) or Target

(PowerVault500/PowerVault 600 storage system). Install the software on a

separate Client/Server running Windows operating system.

Turn on the PowerVault 500/PowerVault 600 storage system.

Create one or more volumes on the local drives for creating Virtual Disks

for iSCSI Targets.

From Initiator Server/Client

Configure the Microsoft iSCSI Initiator with iSNS server's information.

Go to

Start

→

Programs

→

Microsoft iSCSI Initiator

→

Discovery

tab

→

Add

Add the IP address of the iSNS server and click

Verifying the iSNS Server Settings (Optional)

In the iSNS Server, go to

iSNS Server Properties

→

General

tab.

The Registered iSCSI Initiators and Targets list is displayed.

The iSCSI Initiator that you added is listed.

Setting Up the Target (PowerVault 500/PowerVault 600 Storage System)

Go to the PowerVault 500/PowerVault 600 storage system. Select

Start

→

Programs

→

Administrative Tools

→

Microsoft iSCSI Software Target

open

Microsoft iSCSI Software Target

console. Select the iSCSI Target,

right-click and select

Properties

In the

iSCSI Target Properties

window, go to the

iSNS

tab and add the

iSNS server information (DNS Name or IP address).

Repeat step 2 to step 5 in the "Creating the Target" on page 9. When you

use the

Browse

option, the iSCSI Initiator Identifier of all Initiators that

are registered with iSNS server are listed.

NOTE: The iSCSI Target may cause errors when you query the iSNS server

for Initiator discovery. This is a known issue and will be addressed in a future

release.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Dell PowerVault DP500 Manuel d'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel informatique Dell PowerVault DP500