Dell PowerVault DP500 Manuel d'utilisateur télécharger pdf (Page 24)

24 Detailed End-to-End iSCSI Setup

The following steps describe the procedure to create two iSCSI Targets

that use two dedicated NICs for iSCSI traffic as shown in Figure 2-7. Each

Target is made available to a different application on the host server. The

Target in the Microsoft-based iSCSI Target solution only defines the path

that the iSCSI storage traffic uses from the iSCSI Initiator.

Figure 2-7. Microsoft iSCSI Software Target Properties

Follow the steps below to create iSCSI Targets:

In the Microsoft iSCSI Software target Console, right-click iSCSI

Target on the left pane to launch the

Create iSCSI Target Wizard

The

Welcome to the Create iSCSI Target Wizard

screen appears.

Click

The

iSCSI Target identification

screen appears. Enter the Target

name and Description. You can use the

Browse

option to view and

choose the servers/clients in the network.

The

iSCSI initiators identifiers

screen appears.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 43 44

Pas de commentaire

Dell PowerVault DP500 Manuel d'utilisateur Page 24