Dell PowerVault TL4000 Manuel d'utilisateur télécharger pdf (Page 28)

Configuring the iSCSI bridge

Page 26 Dell Model TL24iSCSIxSAS 1Gb iSCSI to SAS User’s Guide Rev.C

7.5 Network Services

This configuration page will allow the user to configure the IP-addresses for the Network Time Protocol

server and the iSNS-service.

From within the main menu select the Service Control icon under the Network section.

The GUI will now display the following window.

Figure 21 Network service page

The Network Time Protocol (NTP) is a protocol for synchronizing the clocks of computer systems over the IP

network.

To enable NTP on the bridge, click the tick box “Use NTP” and enter the IP-address for the NTP Server and

then click the save button

Internet Storage Name Service (iSNS) allows for the automated discovery, management, and configuration

of iSCSI devices from a central point. If this option is enabled the bridge will register its resources with a

central iSNS-server.

To enable iSNS on the bridge, click the tick box “Use iSNS” and enter the IP-address for the iSNS-Server

and click the save button.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 65 66

Pas de commentaire

Dell PowerVault TL4000 Manuel d'utilisateur Page 28