Dell UPS 1920T Manuel d'utilisateur Page 14

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 88
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 13
14
|
Getting Started
Configuring the Card
To configure the card:
1 Verify that the serial cable (supplied) is connected to the card's Settings port and the computer's
COM port.
2 Open your terminal emulation program (such as HyperTerminal).
3 Select the serial connection (such as COM1).
4 Set the serial line to 9600 baud, 8 data bits, No parity, 1 stop bit, no flow control (see Figure 6).
Figure 6. Configuring Port Settings
Vue de la page 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 87 88

Commentaires sur ces manuels

Pas de commentaire