Dell UPS 2700R Manuel d'utilisateur

www.dell.com | www.support.dell.com | www.dellups.comDell™ Environmental Monitoring ProbeUser’s Guide

4 Installation Installing the EMPTo install the EMP:1If you plan to monitor one or two external contact devices, connect external contact closure inp

Installation 5 2Locate the Ethernet cable (supplied). Connect one end of the cable to the RJ-45 port on the EMP, then connect the other end to the Se

6 Configuring the EMP Configuring the EMPThis section explains how to:• Display temperature, humidity, and status of two contact devices through a st

Configuring the EMP 7 Temperature and humidity measurements are displayed in a graduated bar (see Figure 6). The red zones to the left and right of t

8 Configuring the EMP Changing Environment SettingsOn the Environment Settings page you can:• Set the temperature and humidity thresholds that trigge

Configuring the EMP 9 2Enter changes. Configurable environment settings are:Parameter DescriptionSensor name The name given to the EMP. Dell recommen

10 Configuring the EMP 3Click Save to save your changes.Notification Notification of each status change if enabled. When the Notification box is sele

Configuring the EMP 11 Viewing and Saving Environment Log Data NOTE: Temperature and humidity measurements are recorded at an interval defined on th

12 Configuring the EMP

*123456789 1*P-164000076 1

www.dell.com | www.support.dell.com | www.dellups.comDell™ Environmental Monitoring ProbeUser’s Guide

Notes and Warnings NOTE: A NOTE indicates important information that helps you make better use of your product. DANGER: A DANGER indicates an immine

Table of Contents i Table of ContentsIntroductionFeatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ii Table of Contents

Introduction 1 IntroductionThe Dell™ Environmental Monitoring Probe (EMP) is an optional connectivity device that lets you remotely monitor the tempe

2 Introduction • When temperature and humidity values exceed user-selectable limits, the event is logged in the card’s Event History log.• Compatible

Installation 3 InstallationThis section explains unpacking and installing the EMP.Unpacking the EMPVerify the package contents (see Figure 2):• Dell