Dell OptiPlex E1 Manuel d'utilisateur télécharger pdf (Page 59)

When you replace the 3.5-inch diskette drive, be sure that the 2 hooks on the right side of the bracket engage the mounting holes in the side of the drive.

5.25-Inch Drive Assembly Removal



To remove a 5.25-inch drive assembly from the middle or lower drive bay, follow these steps:

1. Disconnect the DC power cable and the interface cable from the back of the drive.

2. Press in on the 2 retaining tabs (1 on each side of the drive), and slide the drive assembly forward to remove it.

3. Remove the 4 screws attaching the 5.25-inch drive to the mounting plate, and lift the drive out of the mounting plate.

When you replace the 5.25-inch drive, align the front of the drive flush with the tab at the front of the mounting plate. Insert the 4 mounting screws, and tighten them in

the order stamped on the bottom of the mounting plate.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 74 75

Commentaires sur ces manuels

Pas de commentaire

Dell OptiPlex E1 Manuel d'utilisateur Page 59

Commentaires sur ces manuels

Produits connexes et manuels pour Ordinateurs Dell OptiPlex E1