Dell OptiPlex GX1 Manuel d'utilisateur télécharger pdf (Page 6)

Removing and Replacing Parts: Dell OptiPlex GX1 Systems Service Manual

file:///C|/infodev/2013/eDoc/OpGX1/SM/remsff.htm[2/21/2013 11:45:32 AM]

To replace the computer cover, perform the following steps:

1. Face the front of the computer and hold the cover at a slight angle (see Figure 4).

2. Align the bottom of the cover with the bottom of the chassis and insert the hooks on the cover into the

recessed slots on the computer chassis so that the tabs catch the hooks inside the slots.

3. Pivot the cover down toward the back of the chassis and into position.

Make sure that the securing buttons click into place.

Eject and Power Buttons

Figure 5. Eject and Power Button Removal

1 Diskette eject button

2 Power button

To remove the eject and power buttons, perform the following steps:

1 2 3 4 5 6 7 8 9 10 11 ... 28 29

Pas de commentaire

Dell OptiPlex GX1 Manuel d'utilisateur Page 6