Dell OptiPlex GX270 Manuel d'utilisateur télécharger pdf (Page 110)



Removing a Hard Drive

1. Disconnect the power cable and hard-drive cable from the drive.



2. Press in on the tabs on each side of the drive and slide the drive toward the I/O panel and remove it from the computer.



Installing a Hard Drive



1. Unpack the replacement hard drive, and prepare it for installation.

2. If your replacement hard drive does not have the bracket rails attached, remove the rails from the old drive by removing the two screws that secure

each rail to the drive. Attach the bracket rails to the new drive by aligning the screw holes on the drive with the screw holes on the bracket rails and

then inserting and tightening all four screws (two screws on each rail).



NOTICE: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the

computer. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components.

IDE

Serial ATA

1

power cable

2

hard-drive cable

NOTICE: If you install a serial ATA hard drive, it is recommended that you have Dell-supplied data and power cables.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 177 178

Commentaires sur ces manuels

Pas de commentaire

Dell OptiPlex GX270 Manuel d'utilisateur Page 110

Commentaires sur ces manuels

Produits connexes et manuels pour Ordinateurs Dell OptiPlex GX270