Dell OptiPlex GX270 Manuel d'utilisateur télécharger pdf (Page 86)



Installing a CD/DVD Drive

1. Unpack the drive and prepare it for installation.



Check the documentation that accompanied the drive to verify that the drive is configured for your computer. If you are installing an IDE drive, configure

the drive for the cable select setting.

2. If the replacement drive does not have the bracket rails attached, remove the rails from the old drive by removing the two screws that secure each rail

to the drive. Attach the bracket to the new drive by aligning the screw holes on the drive with the screw holes on the bracket rails and then inserting

and tightening all four screws (two screws on each rail).



3. Gently slide the drive into place until the tabs securely click into position.

4. Connect the power, audio, and CD/DVD drive cables to the drive.

5. Connect the other end of the CD/DVD drive cable to the IDE2 system board connector.



1

drive

2

bracket rails (2)

3

screws (4)

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 177 178

Commentaires sur ces manuels

Pas de commentaire

Dell OptiPlex GX270 Manuel d'utilisateur Page 86

Commentaires sur ces manuels

Produits connexes et manuels pour Ordinateurs Dell OptiPlex GX270