Dell PowerEdge M805 Manuel d'utilisateur télécharger pdf (Page 26)

24 Configuration Guide

If desired, configure the iDRAC network setting for DHCP mode.

NOTE: You cannot set a static IP address for the iDRAC using the LCD

Configuration Wizard. See "Configuring iDRAC Networking Using the Web-

Based Interface" on page 27.

Review the settings on the

Network Summary

screen.

– If the settings are correct, press the center button to close the

configuration wizard and return to the

Main Menu

– If the settings are not correct, use the left arrow key to return to the

screen for that setting and correct it.

After you complete the LCD Configuration Wizard, y

ou can access the CMC

on the network using the Web-based CMC interface or text-based interfaces

such as a serial console, Telnet, or SSH.

Note that if you intend to use static addresses rather than DHCP to access

the iDRACs, you must configure them using the CMC Web-based interface

or CLI.

Configuring the CMC Network Settings Using a Management Station and CLI

The LCD Configuration Wizard is the quickest way to initially configure the

CMC network settings. However, you can also use a management station and

and a local connection to access the CMC. There are two ways to create a

local connection to the CMC:

• The CMC Console via the optional iKVM. Press <Print Screen> and

select blade number 17. Blade number 17 is a direct local connection to

the CMC.

• Serial connection using a null modem cable (115200 bps, 8 Data bits, no

parity, 1 stop bit, and no flow control).

Once you have established a connection to the CMC, you can complete the

initial CMC network configuration:

Log into the CMC.

The default user name is

root

and the default password is

calvin

Ty p e

getniccfg

and press <Enter> to view the current CMC network

parameters.

U003Cbk0.book Page 24 Wednesday, July 30, 2008 12:19 PM

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 231 232

Pas de commentaire

Dell PowerEdge M805 Manuel d'utilisateur Page 26