Dell Precision 390 Manuel d'utilisateur Page 76

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 138
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 75
Removing the Drive Panel (Tower Computer)
1. Follow the procedures in Before You Begin.
2. Remove the computer cover (see Removing the Computer Cover).
3. Remove the front panel. See Removing the Front Panel.
4. Grasping the lever on the sliding plate, pull the sliding plate to the right until it releases the drive panel from its side hinges.
5. Set the drive panel aside in a secure location.
Removing a Drive-Panel Insert
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface on the computer.
NOTE: If you have a desktop computer, the drives and drive panel will appear differently.
1
sliding plate
2
sliding-plate lever
3
drive panel
NOTE: This sliding plate secures and releases the drive panel and helps to secure the drives.
NOTICE: Drive-panel inserts may contain screws on the inside. You can attach the screws to new drives that do not have any screws.
1
drive panel
2
drive-panel
insert
3
drive-panel insert release tabs
(2)
4
drive-panel insert tab in tab
slot
NOTICE: To avoid breaking the drive-panelinserttab,donotpulltheinsertmorethanapproximately1cm(½inch)awayfromthedrivepanelbefore
sliding the tab out of the slot.
Vue de la page 75
1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 137 138

Commentaires sur ces manuels

Pas de commentaire