Dell PowerVault NX3000 Manuel d'utilisateur télécharger pdf (Page 82)

82 Installing System Components

1 If present, remove the front bezel. See

"Removing the Front Bezel."

If a drive blank is present in the bay, remove it. See "Removing a Hard-

Drive Blank."

Figure 3-5. Installing a Hot-Swap Hard Drive

Install the hot-swap hard drive.

Press the button on the front of the drive carrier and open the handle.

Insert the hard-drive carrier into the drive bay until the carrier

contacts the backplane.

Close the handle to lock the drive in place.

If applicable, install the bezel. See "Installing the Front Bezel."

Removing a Hard Drive From a Hard-Drive Carrier

Remove the screws from the slide rails on the hard-drive carrier and separate

the hard drive from the carrier. See

Figure 3-6

1 release button 2 hard drive carrier handle

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 115 116

Pas de commentaire

Dell PowerVault NX3000 Manuel d'utilisateur Page 82