Dell Latitude 13 (Mid 2010) Manuel d'utilisateur télécharger pdf

About Warnings

WARNING: A WARNING indicates a potential for property damage, personal injury,

or death.

Important Information—Installing the

Hard-Drive Cable Kit

WARNING: Before working inside your computer, read the safety information that

shipped with your computer. For additional safety best practices information, see the

Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING: To guard against electrical shock, always unplug your computer from the

electrical outlet before removing and replacing parts on the computer.

The hard-drive cable kit prevents the hard-drive cable from getting bent or

damaged, while replacing the the bottom base cover. The kit consists of:

•hard-drive flex cable

• rubber bumper

To install the hard-drive cable kit:

Remove the bottom base cover and the battery.

NOTE: For more information on removing the bottom base cover and the battery, see

the Service Manual at support.dell.com/manuals.

January 2013

H_D _Kit.fm Page 1 Thursday, January 3, 2013 11:15 PM

1 2 3 4 5 6

Résumé du contenu

Page 1 - Hard-Drive Cable Kit

About Warnings WARNING: A WARNING indicates a potential for property damage, personal injury, or death.Important Information—Installing the Hard-Driv

Page 2

2Disconnect the ends of the existing hard-drive flex cable from the system board and hard-drive connectors.3Peel the hard-drive flex cable away from t

Page 3

4Arrange the hard-drive flex cable to allow space for the rubber bumper.5Peel the double sided tape to attach the rubber bumper to the computer. NOTE

Page 4

6 Re-assemble the cable on adding the rubber bumper. NOTE: The cable should be pressed between the board and the hard drive.7 Fix the double-sided ta

Page 5

10Connect the other end of the hard-drive flex cable to the connector on the system board. 11Press the hard-drive flex cable to ensure that the double

Page 6 - ____________________

Removing the Hard-Drive Cable KitTo remove the hard-drive cable kit follow the steps in reverse order. CAUTION: While replacing the bottom base cover