Dell TL24iSCSIxSAS Guide de l'utilisateur télécharger pdf (Page 14)

Installing the iSCSI bridge

Page 12 Dell Model TL24iSCSIxSAS 1Gb iSCSI to SAS User’s Guide Rev.C

Figure 6 Installing the bridge and store the shipping lock

• Store the shipping lock on the iSCSI board (see Figure 6, step 3).

• Connect the Ethernet cables.

• Connect the SAS cables and peripherals.

• Connect the library power cord.

• Configure the bridge’s host name and IP-address.

There are seven basic steps to installing the iSCSI bridge on the Dell PowerVault TL4000:

• Remove the blank plate (see Figure 7) on the rear of the library (you need a #3 Phillips screwdriver).

Figure 7 Remove the blank plate on the PowerVault TL4000

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 65 66

Pas de commentaire

Dell TL24iSCSIxSAS Guide de l'utilisateur Page 14