Dell TL24iSCSIxSAS Guide de l'utilisateur télécharger pdf (Page 30)

Configuring the iSCSI bridge

Page 28 Dell Model TL24iSCSIxSAS 1Gb iSCSI to SAS User’s Guide Rev.C

7.7 Multipath Settings

Multipath is a method of sending data to an iSCSI target over multiple network connections. These network

connections can be on the same physical network cable or separate network cables. This increases the

data bandwidth to send data over. A user may have a single iSCSI Session for an iSCSI Target, but within

that session may have multiple connections.

iSCSI uses two main network ports, 3260 and 860. Within the Multipath configuration the user can specify

which ports will be made available, 860, 3260 or both.

By default, the bridge will allow up to 10 iSCSI connections per iSCSI Session. However, some initiators will

only allow 1 iSCSI Connection per iSCSI Session and will reject any login to an iSCSI Target that tries to

negotiate more iSCSI Connections. If this is the case, click the compatibility check box and this will limit the

number of connections to 1.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 65 66

Pas de commentaire

Dell TL24iSCSIxSAS Guide de l'utilisateur Page 30