Dell PowerEdge 1800 Guide de dépannage télécharger pdf (Page 89)

Installing System Options 89

Replace the three screws to secure the control panel to the front of the system.

Place the control panel and chassis-intrusion switch cables in the cable retainer clip, remove

the cable slack between the clip and the control panel, and then close the clip. See Figure 6-8.

If you removed a 5.25-inch drive in step 4 of the previous procedure, reinstall the drive. If you

removed the chassis drive insert in step 4 of the previous procedure, reinstall the insert. See

"Installing the Front-Panel Drive Inserts" and "Installing a 5.25-Inch Drive" in

"Troubleshooting Your System."

If the system is a tower, stand the system upright.

Close the system. See "Closing the System" in "Troubleshooting Your System."

Reinstall the bezel. See "Installing the Bezel" in "Troubleshooting Your System."

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 159 160

Pas de commentaire

Dell PowerEdge 1800 Guide de dépannage Page 89