Dell OpenManage Server Administrator Version 2.3 Manuel d'utilisateur télécharger pdf (Page 167)

Using the Storage Management Service 167

omconfig Connector Commands

The following sections provide the omconfig command syntax required to execute connector tasks.

omconfig Rescan Connector

Use the following omconfig command to rescan a controller connector. This command rescans all

connectors on the controller and is therefore similar to performing a controller rescan.

Complete Syntax

omconfig storage connector action=rescan controller=id connector=id

where id is the controller ID and the connector ID as reported by the omreport command. To obtain

these values, enter omreport storage controller to display the controller IDs and then enter omreport

storage connector controller=ID to display the IDs for the connectors attached to the controller.

Example Syntax

For example, to rescan connector 2 on controller 1, enter:

omconfig storage connector action=rescan controller=1 connector=2

omconfig Enclosure Commands

The following sections provide the omconfig command syntax required to execute enclosure tasks.

Table 8-25. omconfig Connector Commands

Required Command Levels (1, 2, 3) Optional name=value pairs

omconfig storage connector

action=rescan controller=id connector=id

Table 8-26. omconfig Enclosure Commands

Required Command Levels (1, 2, 3) Optional name=value pairs

omconfig storage enclosure

action=enablealarm controller=id enclosure=id

action=disablealarm controller=id enclosure=<ENCLOSUREID>

action=enablests

action=disablests

action=setassettag controller=id enclosure=<ENCLOSUREID>

assettag=<string>

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 215 216

Pas de commentaire

Dell OpenManage Server Administrator Version 2.3 Manuel d'utilisateur Page 167