Dell OpenManage Server Administrator Version 2.3 Manuel d'utilisateur télécharger pdf (Page 173)

Using the Storage Management Service 173

Example Syntax

For example, you may want to specify the minimum and maximum warning thresholds for all

temperature probes to 10 and 40 degrees celsius.

Example for SCSI, SATA, and ATA Controllers

In this example, the temperature probes reside in the enclosure attached to connector 2 on controller 1.

To set the thresholds for all temperature probes to 10 and 40 degrees celsius, enter:

omconfig storage enclosure action=setalltempprobes controller=1

enclosure=2 minwarn=10 maxwarn=40

Example for SAS Controllers

In this example, the temperature probes reside in enclosure 3 attached to connector 2 on controller 1. To

set the thresholds for all temperature probes to 10 and 40 degrees celsius, enter:

omconfig storage enclosure action=setalltempprobes controller=1

enclosure=2:3 minwarn=10 maxwarn=40

omconfig Reset All Temperature Probe Thresholds

Use the following omconfig command syntax to reset the minimum and maximum warning temperature

thresholds back to their default value for all temperature probes in the enclosure.

Complete Syntax

omconfig storage enclosure action=resetalltempprobes controller=id

enclosure=<ENCLOSUREID>

where id is the controller ID. The <ENCLOSUREID> variable specifies the enclosure.

Example Syntax

For example, you may want to reset the thresholds for all temperature probes in enclosure 2 on

controller 1.

Example for SCSI, SATA, and ATA Controllers

In this example, the temperature probes reside in the enclosure attached to connector 2 on controller 1.

To reset the thresholds for all temperature probes, enter:

omconfig storage enclosure action=resetalltempprobes controller=1

enclosure=2

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 215 216

Pas de commentaire

Dell OpenManage Server Administrator Version 2.3 Manuel d'utilisateur Page 173