Dell XPS 700 Jet Black Manuel d'utilisateur télécharger pdf (Page 23)

Back to Contents Page

 Removing and Installing Parts

Dell™XPS™700ServiceManual

Memory

You can increase your computer memory by installing memory modules on the system board.

Your computer supports DDR2 memory. For additional information on the type of memory supported by your computer, see Memory.



DDR2 Memory Overview

l DDR2 memory modules should be installed in pairs of matched memory size and speed. If the DDR2 memory modules are not installed in matched pairs,

the computer will continue to operate, but with a slight reduction in performance. See the label on the upper-right or upper-left corner of the module to

determine the module's capacity.

The recommended memory configurations are:

¡ A pair of matched memory modules installed in DIMM connectors 1 and 2

¡ A pair of matched memory modules installed in DIMM connectors 1 and 2 and another matched pair installed in DIMM connectors 3 and 4

l If you install mixed pairs of PC2-4300 (DDR2 533-MHz) and PC2-5300 (DDR2 667-MHz) memory, the modules function at the speed of the slowest

module installed.

l Be sure to install a single memory module in DIMM connector 1, the connector closest to the processor, before you install modules in any other

connector.

Memory

Cards

Drives

Hard Drive

Drive Panel

Floppy Drive

Media Card Reader

CD/DVD Drive

Processor Airflow Shroud

Processor

Fans

System Board

Power Supply

Installing the Power Supply

Front I/O Panel

Battery

Computer Stand

NOTE: Always install DDR2 memory modules in the order indicated on the system board.

NOTICE: Do not install ECC memory modules.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 125 126

Commentaires sur ces manuels

Pas de commentaire

Dell XPS 700 Jet Black Manuel d'utilisateur Page 23

Commentaires sur ces manuels

Produits connexes et manuels pour Ordinateurs Dell XPS 700 Jet Black