Dell 15 Manuel du propriétaire télécharger pdf (Page 58)

Replacing the Optical-Drive

Connector Board

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before Working Inside Your Computer. After working inside your

computer, follow the instructions in After Working Inside Your

Computer. For more safety best practices, see the Regulatory

Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Slide the optical-drive connector board into the system-board

connector.

2 Replace the screw that secures the optical-drive connector board to the

computer base.

3 Route the antenna cables on the optical-drive connector board and slide

the cables into the slot on the computer base.

4 Close the display and turn the computer over.

5 Route the antenna cables through the routing guide on the computer

base.

6 Connect the antenna cables to the wireless card. See “Replacing the

Wireless Card”.

Post-requisites

1 Follow the procedure from step 3 to step 9 in “Replacing the Palm Rest”.

2 Replace the keyboard.

3 Follow the procedure from step 4 to step 5 in “Replacing the Optical

Drive”.

4 Follow the procedure from step 4 to step 6 in “Replacing the Hard Drive”.

5 Replace the base cover.

6 Replace the battery.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 96 97

Pas de commentaire

Dell 15 Manuel du propriétaire Page 58