Dell 15 Manuel du propriétaire télécharger pdf (Page 73)

Removing the Heat-Sink

Assembly

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before Working Inside Your Computer. After working inside your

computer, follow the instructions in After Working Inside Your

Computer. For more safety best practices, see the Regulatory

Compliance home page at dell.com/regulatory_compliance.

WARNING: The heat sink may become hot during normal operation.

Allow sufficient time for the heat sink to cool before you touch it.

CAUTION: To ensure maximum cooling for the processor, do not

touch the heat transfer areas on the heat sink. The oils in your skin can

reduce the heat transfer capability of the thermal grease.

Prerequisites

1 Remove the battery.

2 Remove the base cover.

3 Follow the procedure from step 1 to step 3 in “Removing the Hard Drive”.

4 Follow the procedure from step 1 to step 2 in “Removing the Optical

Drive”.

5 Remove the wireless card.

6 Remove the keyboard.

7 Follow the procedure from step 1 to step 7 in “Removing the Palm Rest”.

8 Remove the battery-connector board.

9 Remove the optical-drive connector board.

10 Follow the procedure from step 1 to step 5 in “Removing the System

Board”.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 96 97

Pas de commentaire

Dell 15 Manuel du propriétaire Page 73