Dell D630 - LATITUDE ATG NOTEBOOK Guide de dépannage télécharger pdf (Page 12)



10. From the back of the computer, remove the two M2.5 x 8-mm screws.



11. From the bottom of the computer, remove the two M2.5 x 8-mm screws labeled "D."



12. Turn the computer top-side up and open the display.



13. Lift the display assembly out of the computer base.

Removing the Display Bezel



1. Follow the instructions in Before You Begin.



2. Remove the display assembly (see Display Assembly).



3. Use a plastic scribe to pry the six rubber screw-covers/display-bumpers out of the screw holes on the front of the bezel.

antenna cables (2)

display cable pull-tab



CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface, such as a connector on the back of the computer.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 42 43

Pas de commentaire

Dell D630 - LATITUDE ATG NOTEBOOK Guide de dépannage Page 12