Dell 5524 Guide de l'utilisateur télécharger pdf (Page 48)

100

101

48 Dell PowerConnect 55xx Systems User Guide

• Loading Software onto Stack Members

• Rebooting the Stack

• Managing Configuration Files on the Stack

Adding a Unit to the Stack

The recommended procedure to add a unit to a stack is as follows:

Place the powered-off unit in its physical place in the stack, and insert the

stacking link in the unit (but do not connect it to the rest of the stack).

Power up the unit, and set the correct Unit ID, as described below.

Reboot the unit and connect it to the rest of the stack through the stack

link.

Assigning Unit IDs

Each unit in the stack has a unique ID that defines the unit’s position and

function in the stack, as shown in Figure 5-2.

The unit that is assigned Unit ID 1 is the Master unit, by default. The unit

that is assigned Unit ID 2 is the Master Backup unit.

When you power-up the stack, each unit is assigned a unique Unit ID. This is

displayed on the front panel of the unit, as shown in Figure 5-2.

The Unit ID of each unit can be either automatically assigned or manually

assigned, as described in step 1 to step 4 below.

To assign IDs to the units in the stack, do the following for each unit in the

stack:

Connect the unit to the terminal.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 727 728

Commentaires sur ces manuels

Pas de commentaire

Dell 5524 Guide de l'utilisateur Page 48

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs de réseau Dell 5524