Dell 2355dn Multifunction Mono Laser Printer Manuel d'utilisateur télécharger pdf (Page 312)

311

Fax Problems

Condition Suggested solutions

Receiving fax calls are not being

answered by the printer

•

Receive Mode

set to

Tel

mode. (manual receive mode)

• The rings-to-answer setting might not be set correctly. (Under

Ans/Fax

mode, set the

Ring to Answer

to a digit greater than the

Ring to Answer

setting for the TAD.)

• The DPRD feature might be turned on, but you do not have the service, or you do have

the service and the feature is not set correctly.

• The fax line cord might not be correctly connected, or the fax line cord is faulty.

• The printer might not be able to detect Receiving fax tones because the answering

machine is playing a voice message.

• A voice-messaging service might be interfering with the printer as it attempts to answer

calls.

• Fax Line might have signal integration issues. Please carry out

Fax Line Test

from

Op-panel to confirm line status. See "Testing Fax line connection".

• The printer is monitoring line condition while it is receiving or sending a fax job. If an

error occurs during the transmission and the

ECM Mode

setting is

, the printer may

request that the portion of the fax job to be resent. You should turn off

ECM Mode

only

if you are having trouble sending or receiving a fax job, and you are willing to accept the

errors in the transmission job. Turning off the setting might be useful when you are trying

to send a fax long distant or receive from long distant (example: other countries etc.)

• The printer might be out of paper and the memory is full.

The printer cannot receive faxes

from an extension telephone.

• The fax cable might not be securely connected.

• The printer dialing mode might be incorrectly set, or the extension phone might be

incorrectly set.

Faxes are not received

automatically.

•The

Fax

mode should be selected.

• Make sure that there is paper in the paper tray.

• Check to see if the display shows

Memory Full

The Receiving fax has blank

spaces or is received in

poor-quality.

• A noisy phone line can cause line errors.

• Check your printer by making a copy.

Receiving faxes are too light. The printer might be running out of toner while printing a fax. Under Toner empty

conditions, the printer will store the fax job into memory, as soon as possible, replace the

print cartridge, and then reprint the fax.

Faxes are printed on two pages

instead of one.

The auto reduction setting may be turned Off, try enabling this setting

1 2 ... 307 308 309 310 311 312 313 314 315 316 317 ... 343 344

Commentaires sur ces manuels

Pas de commentaire

Dell 2355dn Multifunction Mono Laser Printer Manuel d'utilisateur Page 312

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimeurs Dell 2355dn Multifunction Mono Laser Printer