Dell 3000cn Color Laser Printer Manuel d'utilisateur Page 139
- Page / 194
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Printing on both ends of the
transparencies is faded.
· This occurs when the printer is operating in a location where relative humidity reaches
85% or more. Adjust the humidity or relocate the printer to an appropriate environment.
Option Problems
If an option does not operate correctly following installation or stops working:
Turn off the printer, wait for 10 seconds, and then turn on the printer. If this does not fix the problem, unplug the
printer, and check the connection between the option and the printer.
Print the Printer Settings page to see if the option is listed in the Installed Options list. If the option is not listed,
reinstall it. See "
Printing a Printer Settings Page."
Make sure the option is selected in the printer driver you are using.
The following table lists printer options and corrective actions for related problems. If the suggested corrective action does not
correct the problem, call customer service.
Problem
Action
Optional tray
· Make sure a secure connection exists between trays (250-sheet tray module or 500-sheet tray module).
· Make sure the print media is loaded correctly. See "
Loading Print Media in Optional Trays" for more
information.
Optional
duplex
module
· If the duplex module is listed on the Printer Settings page, and the print media jams when it enters or exits
the duplex module, the printer and duplex module may not be properly aligned.
· If the duplex module is not available, verify the duplex module cable is connected to the printer and that
- Notes, Notices, and Cautions 4
- Finding Information 5
- Online Help 9
- Order Supplies at: 9
- Contact Dell Support at: 9
- Page Display Format 10
- Left Frame 11
- Right Frame 11
- Details of Menu Items 12
- Printer Status 13
- Printer Events 14
- Print Volume 14
- Printer Information 14
- Printer Jobs 15
- Printer Settings 16
- Printer Maintenance 20
- Copy Printer Settings 22
- Print Server Settings 22
- Other Features 29
- Tray Settings 30
- About Your Printer 31
- 6. Close the front door 33
- Installing the Drum Cartridge 34
- Connecting Your Printer 37
- Turn On the Printer 38
- Assign an IP Address 40
- Verify the IP Settings 41
- Windows XP/Server 2003 46
- Windows 2000/NT4.0 47
- Windows Me/95/98 47
- Installing a Memory Card 52
- Print Media Guidelines 55
- Recommended Paper 56
- Unacceptable Paper 56
- Selecting Paper 57
- Printing on Letterhead 57
- Transparencies 58
- Envelopes 59
- Print Media Sizes and Support 61
- Print Media Supported 61
- Loading Print Media 63
- Multipurpose Feeder 65
- Capacity 66
- Print Media Dimensions 66
- Using the Multipurpose Feeder 68
- Linking Trays 69
- Using the Duplex Function 69
- Using the Center Output Tray 70
- Using the Support Extension 71
- Operator Panel 72
- Settings 75
- Initializing NVRAM 76
- Understanding Printer Menus 77
- Paper Size 79
- Replace Toner 80
- Configure 80
- Error Alarm 81
- Job Timeout 81
- Panel Language 81
- Auto Log Print 82
- ID Print 82
- Text Print 82
- Banner Sheet 83
- RAM Disk 83
- Maintenance 84
- Init NVRAM 85
- Parallel 86
- Ethernet 88
- Protocol 89
- IP Filter 89
- Input Tray 90
- Orientation 91
- Symbol Set 93
- Font Size 94
- Font Pitch 94
- Form Line 94
- Quantity 95
- Image Enhance 95
- Hex Dump 95
- Draft Mode 96
- Line Termination 96
- Color Mode 96
- Setting of Panel Lock 97
- Enabling Menus 98
- Printing Status Window 99
- Status Window 99
- Status Monitor Console 99
- User Setup Disk Creating Tool 100
- Software Update 100
- Printing 101
- Canceling a Print Job 102
- Printing a Font Sample List 103
- Proof Print 104
- Secure Print 105
- Point and Print 106
- Peer-to-Peer 107
- Understanding Fonts 108
- Bitmapped and Scalable Fonts 109
- Resident Fonts 110
- Symbol Sets 113
- Clearing Jams 120
- 2. Open the inner rear cover 122
- 5. Close the duplex module 127
- 8. Close the cover 127
- 3. Close the rear cover 128
- 6. Close the cover 129
- Troubleshooting 133
- Basic Printer Problems 134
- Display Problems 134
- Printing Problems 134
- Print Quality Problems 136
- Option Problems 139
- Other Problem 140
- Contacting Service 140
- Troubleshooting Guide 140
- Setup Paper Size 148
- Setup Paper Type 150
- Parallel Printing 150
- USB Printing 151
- Setup Network 152
- Setup Security 153
- Trouble Shooting Instructions 154
- Clear NVRAM 156
- 7. Close the top cover 159
- 1. Open the front door 163
- 5. Close the front door 164
- Maintaining Your Printer 165
- Storing Print Media 166
- Replacing the Drum Cartridges 166
- 4. Close the top cover 169
- Replacing the Cleaning Pad 170
- Replacing the Toner Cartridge 172
- Cleaning Inside the Printer 175
- Removing Options 177
- 6. Replace the printer 182
- Printer Specifications 184
- Cartridge and Printer Life 185
- Environmental 185
- Chemical Emission 186
- Safety Information 188
- Regulatory Information 188
- CE Notice (European Union) 189
- CE Mark Notice 190
- NOM Information (Mexico Only) 190
- Noise Emissions Levels 191
- Laser Notice 191
- Energy Star 191
- ENERGY STAR® Emblem 192
- Appendix 193
Produits connexes et manuels pour Imprimeurs Dell 3000cn Color Laser Printer
(21 pages)
(412 pages)
(12 pages)© 2020, manymanuals.fr. Tous droits réservés | 2.475 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels