Dell 3000cn Color Laser Printer Manuel d'utilisateur télécharger pdf (Page 69)

Load only one size and type of print media during a single print job.

To achieve the best possible print quality, use only high-quality print media that is designed for use in laser printers.

For more guidelines on print media, see "

Print Media Guidelines."

Do not add or remove print media when there is still print media in the multipurpose feeder or when the printer is

printing from the multipurpose feeder. This may result in a paper jam.

Print media should be loaded with the recommended print side up and the top of the print media going into the

multipurpose feeder first.

Do not place objects on the multipurpose feeder. Also, avoid pressing down or applying excessive force on it.

Do not remove any tray while a job is printing from the multipurpose feeder or Printing is displayed on the operator

panel. This may result in a paper jam.

The icons on the multipurpose feeder identify how to load the multipurpose feeder with paper, and how to turn an envelope

for printing.

Linking Trays

Tray linking allows you to load the same size and type of print media in multiple sources. The printer automatically links the

source/trays and will use the first tray until it runs out, then switch to the linked tray.

If you load the same size print media in each tray, make sure the print media is the same type in order to link the trays.

When the selected trays are loaded with the same size and type of print media, select the Paper Size and Paper Type

settings in the Tray Settings for each source.

To disable tray linking, set the Paper Size and Paper Type to a unique value in each one of the trays. If all trays do not

have the same type of print media when linked, you could mistakenly print a job on the wrong paper type.

Using the Duplex Function

Duplex printing (or two-sided printing) allows you to print on both sides of a sheet of paper. For sizes that are acceptable for

duplex printing, see "

Print Media Sizes and Support."

Using Duplex Bind

When using duplex bind printing in the printer driver, you must select either Flip on Short Edge or Flip on Long Edge.

Binding in the Duplex menu item defines the way duplexed pages are bound, and how the printing on the back of the sheet

(even-numbered pages) is oriented in relation to the printing on the front (odd-numbered pages).

The two values for Binding are:

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 193 194

Pas de commentaire

Dell 3000cn Color Laser Printer Manuel d'utilisateur Page 69