Dell Acceleration Appliances for Databases Manuel d'utilisateur télécharger pdf (Page 20)

All other ports are configured as normal for iSCSI. Below is a sample screen before the port

configuration is done:

1. Edit the first port with the correct IP address for port splitting, as explained in the bullet list

above.

2. Set the MTU value for the port:

3. Repeat the previous two steps for each of the ports.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 88 89

Pas de commentaire

Dell Acceleration Appliances for Databases Manuel d'utilisateur Page 20