Dell PowerVault NX3300 Manuel d'utilisateur Page 110
- Page / 123
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Error Code Message Information
CPU0204
Message CPU <
number
> <
name
> voltage is outside of range.
LCD Message CPU <
number
> <
name
> voltage is outside of range. Re-seat CPU.
Details Voltages outside the allowable range may damage electrical components or may cause
the system to shutdown.
Action
1. Turn off the system and remove input power for one minute.
2. Ensure the processor is seated correctly.
3. Reapply input power and turn on the system.
4. If the issue persists, see Getting Help.
CPU0700
Message CPU <
number
> initialization error detected.
LCD Message CPU <
number
> initialization error detected. Power cycle system.
Details System BIOS was unable to initialize the processor.
Action
1. Turn off the system and remove input power for one minute.
2. Ensure the processor is seated correctly.
3. Reapply input power and turn on the system.
4. If the issue persists, see Getting Help.
CPU0701
Message CPU <
number
> protocol error detected.
LCD Message CPU <
number
> protocol error detected. Power cycle system.
Details System event log and operating system logs may indicate that the exception is external
to the processor.
Action
1. Check system and operating system logs for exceptions. If no exceptions are
found, continue.
2. Turn off the system and remove input power for one minute.
3. Ensure the processor is seated correctly.
4. Reapply input power and turn on the system.
5. If the issue persists, see Getting Help.
CPU0702
Message CPU bus parity error detected.
LCD Message CPU bus parity error detected. Power cycle system.
Details System event log and operating system logs may indicate that the exception is external
to the processor.
Action
1. Check system and operating system logs for exceptions. If no exceptions are
found, continue.
2. Turn off the system and remove input power for one minute.
3. Ensure the processor is seated correctly.
110
- Dell PowerVault NX3300 1
- Owner's Manual 1
- Notes, Cautions, and Warnings 2
- Contents 3
- About Your System 9
- LCD Panel Features 10
- Home Screen 11
- Setup Menu 11
- Diagnostic Indicators 12
- Hard-Drive Indicator Patterns 13
- NIC Indicator Codes 15
- Power Indicator Codes 15
- Getting Started Guide 17
- Choosing The System Boot Mode 19
- Entering System Setup 20
- System Setup Options 20
- System Setup Main Screen 21
- System BIOS Screen 21
- System Information Screen 21
- Memory Settings Screen 22
- Processor Settings Screen 22
- SATA Settings Screen 23
- Boot Settings Screen 24
- Integrated Devices Screen 24
- Serial Communications Screen 25
- System Security Screen 27
- Miscellaneous Settings 28
- Boot Manager Screen 31
- Embedded System Management 32
- Installing System Components 33
- Installing The Front Bezel 34
- Opening The System 34
- Inside The System 35
- Cooling Shroud 36
- System Memory 37
- Mode-Specific Guidelines 40
- Sample Memory Configurations 41
- Removing Memory Modules 43
- Installing Memory Modules 44
- Hard Drives 45
- Optical Drive 49
- Cooling Fans 50
- Installing A Cooling Fan 51
- Removing An Expansion Card 53
- Installing An Expansion Card 54
- SD vFlash Card 56
- Internal Dual SD Module 57
- Internal SD Card 59
- Network Daughter Card 61
- Processors 62
- Removing A Processor 63
- Installing A Processor 66
- Power Supplies 67
- Hot Spare Feature 68
- Removing An AC Power Supply 68
- Installing An AC Power Supply 69
- Input Requirements 70
- Kit Contents 70
- Required Tools 70
- Required Wires 70
- Removing A DC Power Supply 72
- Installing A DC Power Supply 73
- System Battery 74
- Hard-Drive Backplane 76
- Control Panel Assembly 78
- Removing The Control Panel 79
- VGA Module 81
- Installing The VGA Module 82
- System Board 83
- Installing The System Board 85
- Troubleshooting Your System 87
- Troubleshooting A NIC 88
- Troubleshooting A Wet System 88
- Troubleshooting Cooling Fans 91
- Troubleshooting System Memory 91
- Troubleshooting An SD Card 92
- Troubleshooting A Hard Drive 94
- Troubleshooting Processors 96
- Using System Diagnostics 97
- System Diagnostic Controls 98
- Jumpers And Connectors 99
- System Board Connectors 100
- Technical Specifications 103
- System Messages 107
- Warning Messages 121
- Diagnostic Messages 121
- Alert Messages 121
- Getting Help 123
Produits connexes et manuels pour Matériel informatique Dell PowerVault NX3300
(2 pages)
(14 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.855 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels