Dell PowerVault NX3300 Manuel d'utilisateur télécharger pdf (Page 13)

Memory indicator

Condition Corrective Action

The indicator blinks amber if a

memory error occurs.

See the system event log or system messages for the location of the failed

memory. Reinstall the memory device. If the problem persists, see Getting

Help.

Hard-Drive Indicator Patterns

Figure 3. Hard-Drive Indicators

1. hard-drive activity indicator (green)

2. hard-drive status indicator (green and amber)

NOTE: If the hard drive is in Advanced Host Controller Interface (AHCI) mode, the status indicator (on the right side)

does not function and remains off.

Drive-Status Indicator Pattern (RAID Only) Condition

Blinks green two times per second Identifying drive or preparing for removal

Off Drive ready for insertion or removal

NOTE: The drive status indicator remains off until all hard drives

are initialized after the system is turned on. Drives are not ready

for insertion or removal during this time.

Blinks green, amber, and off Predicted drive failure

Blinks amber four times per second Drive failed

Blinks green slowly Drive rebuilding

Steady green Drive online

Blinks green three seconds, amber three

seconds, and off six seconds

Rebuild aborted

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 122 123

Pas de commentaire

Dell PowerVault NX3300 Manuel d'utilisateur Page 13