Dell PowerVault NX3300 Manuel d'utilisateur télécharger pdf (Page 48)

Removing A Hard Drive From A Hard-Drive Carrier

1. Remove the screws from the slide rails on the hard-drive carrier.

2. Lift the hard drive out of the hard-drive carrier.

Figure 16. Removing and Installing a Hard Drive Into a Hard-Drive Carrier

1. hard-drive carrier

2. hard drive

3. screws (4)

Installing A Hard Drive Into A Hard-Drive Carrier

CAUTION: Many repairs may only be done by a certified service technician. You should only perform

troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or

telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your

warranty. Read and follow the safety instructions that came with the product.

1. Insert the hard drive into the hard-drive carrier with the connector end of the hard drive toward the back.

2. Align the screw holes on the hard drive with the back set of holes on the hard-drive carrier.

When aligned correctly, the back of the hard drive will be flush with the back of the hard-drive carrier.

3. Attach the screws to secure the hard drive to the hard-drive carrier.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 122 123

Pas de commentaire

Dell PowerVault NX3300 Manuel d'utilisateur Page 48