Dell Alienware Aurora R3 (Early 2011) Manuel d'utilisateur télécharger pdf (Page 12)

5. Connect your computer and all attached devices to electrical outlets, and turn them on.

Removing the Hard-Drive Fan Assembly



1. Follow the instructions in Before You Begin.



2. Remove the left side-panel (see Removing the Left Side-Panel).



3. Open the PCI shroud (see Opening the PCI Shroud).



4. Remove the drive-bay shroud (see Removing the Drive-Bay Shroud).



5. Make note of the hard-drive fan cable routing and then disconnect the hard-drive fan assembly cable from the connector on the master I/O board.



6. Lift the hard-drive fan assembly out of the chassis.

Replacing the Hard-Drive Fan Assembly



1. Follow the instructions in Before You Begin.



2. Push the hard-drive fan assembly into the hard-drive fan assembly bay.



3. Route the cable through the slot in the hard-drive bay and then connect the hard-drive fan assembly cable to the connector on the master I/O board.



4. Replace the drive-bay shroud (see Replacing the Drive-Bay Shroud).



5. Close the PCI shroud (see Closing the PCI Shroud).



6. Replace the left side-panel (see Replacing the Left Side-Panel).



7. Connect your computer and all attached devices to electrical outlets, and turn them on.

Removing the PCI-Fan Assembly



1. Follow the instructions in Before You Begin.



2. Remove the left side-panel (see Removing the Left Side-Panel).



3. Open the PCI shroud (see Opening the PCI Shroud).



hard-drive fan assembly cable

hard-drive fan assembly

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 63 64

Commentaires sur ces manuels

Pas de commentaire

Dell Alienware Aurora R3 (Early 2011) Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Ordinateurs Dell Alienware Aurora R3 (Early 2011)