Dell Alienware Aurora R3 (Early 2011) Manuel d'utilisateur télécharger pdf (Page 21)



4. Route and connect the cables that you removed from the connectors on the master I/O board.



5. Replace the PCI-fan assembly (see Replacing the PCI-Fan Assembly).



6. Replace the drive-bay shroud (see Replacing the Drive-Bay Shroud).



7. Close the PCI shroud (see Closing the PCI Shroud).



8. Replace the left side-panel (see Replacing the Left Side-Panel).



9. Connect your computer and all attached devices to electrical outlets, and turn them on.

Back to Contents Page



NOTE: For information on master I/O board connectors, see Master I/O Board Components.

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 63 64

Pas de commentaire

Dell Alienware Aurora R3 (Early 2011) Manuel d'utilisateur Page 21