Dell PowerEdge C1100 Manuel d'utilisateur télécharger pdf (Page 94)

94 Installing System Components

System Battery

Removing the System Battery

CAUTION: Many repairs may only be done by a certified service technician.

You should only perform troubleshooting and simple repairs as authorized

in your product documentation, or as directed by the online or telephone

service and support team. Damage due to servicing that is not authorized by Dell

is not covered by your warranty. Read and follow the safety instructions that

came with the product.

WARNING: There is a danger of a new battery exploding if it is incorrectly

installed. Replace the battery only with the same or equivalent type recommended

by the manufacturer. See your safety information for additional information.

Turn off the system, including any attached peripherals, and disconnect

the system from the electrical outlet.

Open the system. See "Opening the System" on page 55.

Remove the cooling shroud. See "Removing the Cooling Shroud" on

page 56.

Locate the battery socket. See "System Board Connectors" on page 115.

CAUTION: To avoid damage to the battery connector, you must firmly support the

connector while installing or removing a battery.

Support the battery connector by pressing down firmly on the positive side

of the connector.

Press the battery toward the positive side of the connector and lift it out of

the securing tabs at the negative side of the connector.

book.book Page 94 Tuesday, February 26, 2013 11:33 AM

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 139 140

Pas de commentaire

Dell PowerEdge C1100 Manuel d'utilisateur Page 94