Dell Precision 620 Manuel d'utilisateur Page 73

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 131
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 72
Mouse Connector
If you reconfigure your hardware, you may need pin number and signal information for the mouse connector. Figure 8 illustrates the pin numbers for
the mouse connector, and Table 7 lists and defines the pin assignments and interface signals for the mouse connector.
Figure 8. Pin Numbers for the Mouse Connector
Table 7. Pin Assignments for the Mouse Connector
Video Connector
For information on your video connector, see the manufacturer's specifications that came with your video card.
NIC Connector
Your system contains an RJ45 network interface controller (NIC) connector (see Figure 9) on the back panel for attaching an unshielded twisted
pair (UTP) Ethernet cable, which is used in 10BASE-T and 100BASE-TX networks. The NIC provides all the functions normally handled by a
separate network expansion card. To connect your system to and configure it for use on an Ethernet network, see "Using the Network Interface
Controller."
Figure 9. NIC Connector
USB Connectors
Your system contains two Universal Serial Bus (USB) connectors for attaching USB-compliant devices. USB devices are typically peripherals such
as keyboards, mice, printers, and computer speakers.
NOTICE: Do not attach a USB device or a combination of USB devices that draw a maximum current over 500 milliamperes (mA) per
channel at +5 volts (V). Attaching devices that exceed this threshold may cause the USB ports to shut down. See the documentation
that came with the USB devices for their maximum current ratings.
If you reconfigure your hardware, you may need pin number and signal information for the USB connectors. Figure 10 illustrates the pin numbers for
the USB connectors, and Table 8 lists and defines the pin assignments and interface signals for the USB connectors.
Figure 10. Pin Numbers for the USB Connectors
Table 8. Pin Assignments for the USB Connectors
Pin
Signal
I/O
Definition
1
MFDATA
I/O
Mouse data
2
NC
N/A
No connection
3
GND
N/A
Signal ground
4
FVcc
N/A
Fused supply voltage
5
MFCLK
I/O
Mouse clock
6
NC
N/A
No connection
Vue de la page 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 130 131

Commentaires sur ces manuels

Pas de commentaire