Dell PowerEdge 1750 Guide de dépannage télécharger pdf (Page 32)

3. Reboot the system.

If the system fails to boot, see "Getting Help."

When you start the system diagnostics, a message is displayed stating that the diagnostics are initializing. Next, the Diagnostics menu appears. The menu

allows you to run all or specific diagnostics tests or to exit the system diagnostics.



System Diagnostics Testing Options

To select an option from the Diagnostics menu, highlight the option and press <Enter>, or press the key that corresponds to the highlighted letter in the

option.

Table4-1 provides a brief explanation of testing options.



Table 4-1. SystemDiagnosticsTestingOptions

Using the Advanced Testing Options

When you select Advanced Testing from the Diagnostics menu, the main screen of the diagnostics appears and displays the following information:

l Two lines at the top of the screen identify the diagnostics utility, the version number, and the system's service tag number.

l The left side of the screen under Device Groups lists the diagnostic device groups in the order that they are tested if you select All under the Run

Tests submenu. Press the up- or down-arrow keys to highlight a particular device group. Press the left- or right-arrow keys to select the options on the

menu. As you move from one menu option to another, a brief explanation of the highlighted option appears at the bottom of the screen.

l The right side of the screen under Devices for Highlighted Group lists the specific devices within a particular test group.

l The menu area consists of two lines at the bottom of the screen. The first line lists the menu options that you can select; press the left- or right-arrow

key to highlight an option. The second line provides information about the highlighted option.

For more information about a device group or device, highlight the Help option and press <Enter>. Press <Esc> to return to the previous screen.

Error Messages

When you run a system diagnostics test, you may receive an error message during testing. Record the message on a copy of the Diagnostics Checklist. For a

copy of the Diagnostics Checklist and instructions for obtaining technical assistance, see "Getting Help."



Back to Contents Page



NOTE: Before you read the rest of this section, start the system diagnostics so that you can see the utility on your screen.

Testing Option

Function

Quick Tests

Performs a quick check of the system. Select Test All Devices and then select Quick Tests. This option runs device tests that do not

require user interaction. Use this option to quickly identify the source of your problem.

Test One Device

Tests a particular device.

Extended Tests

Performs a more thorough check of the system. Select Test All Devices and then select Extended Tests.

Advanced Testing

Checks a particular area of the system.

Information and

Results

Displays test results.

Program Options

Sets various test parameters.

Device

Configuration

Displays an overview of the devices in the system.

Exit to MS-DOS

Exits the diagnostics and returns to the System Utilities menu.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 73 74

Commentaires sur ces manuels

Pas de commentaire

Dell PowerEdge 1750 Guide de dépannage Page 32

Commentaires sur ces manuels

Produits connexes et manuels pour Serveurs Dell PowerEdge 1750