Dell 3348 - PowerConnect Switch - Stackable Guide de l'utilisateur télécharger pdf (Page 173)

100

101

Configuring System Information 173

– Checked—Removes the Trap Manager Table entry.

– Unchecked—Maintains the Trap Manager Table entry.

Enabling SNMP Traps on the device:

1 Open the SNMP Trap Settings page.

2 Select Enable in the SNMP Trap drop-down list.

3 Define the Select Recipient IP, Traps, and Community String fields.

4 Click Apply Changes. SNMP traps are enabled on the device.

Enabling Authentication Traps on the device:

1 Open the SNMP Trap Settings page.

2 Select Enable in the Authentication Trap drop-down list.

3 Define the Select Recipient IP, Traps, and Community String fields.

4 Click Apply Changes. Authentication traps are enabled on the device.

Adding a new Trap Recipient:

1 Open the SNMP Trap Settings page.

2 Click Add. The Add Trap Receiver/Manager page opens.

Add Trap Receiver/Manager Page

3 Define the Recipient IP Address, Community String, and Trap Enable fields. (Note

that 0.0.0.0 means "All", and the traps are broadcast.)

4 Click Apply Changes. the Trap Recipient/Manager is added, and the device is

updated.

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 377 378

Commentaires sur ces manuels

Pas de commentaire

Dell 3348 - PowerConnect Switch - Stackable Guide de l'utilisateur Page 173

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Dell 3348 - PowerConnect Switch - Stackable