Dell 3348 - PowerConnect Switch - Stackable Guide de l'utilisateur télécharger pdf (Page 354)

354 Configuring Quality of Service

www.dell.com | support.dell.com

• Insert UDP Port—A new UDP port may be defined.

• Map to Queue—Indicates the traffic queue to which the UDP port is assigned.

NOTE: In a stacking configuration, Queue 4 is used for forwarding stacking traffic. Therefore,

assigning additional traffic to Queue 4 may interfere with stack control.

• Remove—Removes UDP port mapping.

– Checked—Removes a UDP port mapping.

– Unchecked—Maintains a UDP port mapping.

Assigning a UDP port to a Traffic Queue:

1 Open the UDP to Queue page.

2 Select a port in the UDP Port List.

Check the Insert UDP Port check box. The New UDP Port field is enabled.

Define a new UDP port.

3 Select a queue number in the Map to Queue drop-down list.

4 Click Apply Changes. The UDP port is assigned a forwarding queue.

Modifying a UDP Port to Traffic Queue Setting:

1 Open the UDP to Queue page.

2 Select a port mapping in the UDP Port List drop-down list. The queue to which the

port is assigned displays in the Map to Queue drop-down list.

3 Select a new traffic queue in the Map to Queue drop-down list.

4 Click Apply Changes. The UDP mapping is reassigned to a different traffic queue.

Removing a UDP port mapping from a UDP to Traffic Mapping Table:

1 Open the UDP to Queue page.

2 Select a port mapping in the UDP Port List drop-down list. The queue to which the

port is assigned displays in the Map to Queue drop-down list.

3 Check the Remove check box.

4 Click Apply Changes. The UDP port mapping is removed from the UDP to the Traffic

Mapping Table.

1 2 ... 349 350 351 352 353 354 355 356 357 358 359 ... 377 378

Pas de commentaire

Dell 3348 - PowerConnect Switch - Stackable Guide de l'utilisateur Page 354