Dell 3348 - PowerConnect Switch - Stackable Guide de l'utilisateur télécharger pdf (Page 227)

Configuring Switch Information 227

• Destination Port—Defines the port number to which port traffic is mirrored. A copy

port cannot mirror itself, cannot be a VLAN member other than the source port

VLAN, and cannot be configured with an IP interface. All traffic on the source port is

tagged.

• Source Port—Defines the port number from which port traffic is copied. A maximum

of 8 ports can be mirrored to one mirroring port.

• Ty p e —Specifies the port traffic type that is mirrored. The possible field values are:

– RX—Indicates that incoming traffic is mirrored.

– TX—Indicates that outgoing traffic is mirrored.

– Both—Indicates that both incoming and outgoing traffic is mirrored.

• Status—Indicates the port state. The possible field values are:

– Active—Indicates the port is enabled, and receiving/ forwarding network traffic.

– Not Active—Indicates that the port is disabled, and is not receiving/forwarding

network traffic.

• Remove—Removes the port mirroring session. The possible field values are:

– Checked—Removes the port mirroring session.

– Unchecked—Maintains the port mirroring session.

Adding a port mirroring session:

1 Open the Port Mirroring page.

2 Click Add. The Add Source Port page opens.

Add Source Port

Define the Source Port and Ty p e fields.

4 Click Apply Changes. The new source port is defined, and the device is updated.

1 2 ... 222 223 224 225 226 227 228 229 230 231 232 ... 377 378

Pas de commentaire

Dell 3348 - PowerConnect Switch - Stackable Guide de l'utilisateur Page 227