Dell Chassis Management Controller Version 1.0 for PowerEdge VRTX Guide de l'utilisateur télécharger pdf (Page 84)

NOTE: The server must be turned off to change the slot state. All servers must be

turned off to change the fabric state. The MAC/WWN addresses must be managed

locally (not by an external console) to use this command.

Synopsis

racadm setflexaddr [-i <slot#> <state>]

[-f <fabricName> <state>]

slot#

> = 1 to 4

fabricName

> = A

state

> = 0 or 1

where 0 is disable and 1 is enable.

Input

• -i <

slot#

> <

state

> — Enables or disables FlexAddress for the specified slot.

• -f <

fabricName

> <

state

> — Enables or disables FlexAddress for the specified

fabric.

Example

• racadm setflexaddr -i 1 0

Slot 1 FlexAddress state set successfully

• racadm setflexaddr -f A 1

Fabric A FlexAddress state set successfully

• racadm setflexaddr -f idrac 1

setled

Description Sets the state (blinking or not blinking) of the LED on the specified module.

To blink or unblink the chassis, I/O modules or the CMC, you must have the Debug Administrator

privilege on CMC. To enable the servers to blink or unblink, you must have the Server

Administrator or Debug Administrator privilege on CMC.

Synopsis

racadm setled -m <module> -l <ledState>

Input

• -m <

module

> - Specifies the module whose LED you want to configure.

module

> can be one of the following:

— server-n, where

=1–4

— switch-n, where n=1

— cmc-active

— chassis

• -l <

ledstate

> - Specifies whether the LED should blink.

ledstate

> can be one of the following:

– 0 — no blinking

– 1 — blinking

Example

• racadm setled -m server-1 -1 1

LED state was set successfully.

NOTE: The setled command generates an error when used on the extension slot of a

multi-slot server.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 154 155

Commentaires sur ces manuels

Pas de commentaire

Dell Chassis Management Controller Version 1.0 for PowerEdge VRTX Guide de l'utilisateur Page 84

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Dell Chassis Management Controller Version 1.0 for PowerEdge VRTX